Get the best image quality with a single click, no matter how complex the geometry is |
Complete your SITAU Phased-Array system with the power of GPU’s |
Undoubtedly the most advanced technology of the SITAU series, allowing simultaneous control of up to 1024 ultrasound channels, it is the ideal solution for phased array inspections requiring large active apertures.
SITAU FP, along with provided Matlab, LabVIEW, C++, etc. libraries which can be interfaced with GPU platforms; SITAU FP becomes a powerful tool for Ultrasound Laboratories and Research Centers, providing the maximum possible flexibility.
The SITAU systems allow to acquire with two different modes.
"Phased Array" mode
In emission, the hardware applies the programmed focal laws for each line of the B-Scan image, allowing focusing at any depth and deflecting the beam at any angle.
In reception, the hardware applies the programmed focal laws, getting, for each line of the B-Scan image, an A-Scan signal obtained by applying the focal law delays to each one of the elements of the active aperture.
"Multichannel" Mode
In emission, the hardware applies the programmed focal law for each line of the B-Scan image, allowing focusing at any depth and deflecting the beam at any angle.
In reception, no processing is performed with the signals received by each element of the active aperture, for each acquisition, the SITAU system returns all the A-Scan signals received by each element of the active aperture.
In this mode the SITAU system operates as a multi-channel system allowing access to the A-Scan signals from each channel, this feature allows the user develop Synthetic Aperture Focusing Techniques (SAFT), Full Matrix Capture (FMC), Total Focusing Method (TFM) or Sampled Phased Array (SPA).